Pages

Showing posts with label curvy dies. Show all posts
Showing posts with label curvy dies. Show all posts

Friday, July 23, 2021

Popular Curvy Blue Jingle Bell Card

The card I'm sharing today was the most popular original card of mine in 2020. Since I'm revisiting some great ideas for Christmas in July, I knew I had to share this again with you!


This card features the Curvy Christmas stamp set and Curvy Dies.  I just LOVE how this Christmas card turned out! It was very easy to make. The addition of the Sounds of the Seasons Dies, Silver and Navy Foil, and Feels Like Frost 6x6 Designer Series Paper (DSP) Stack all comes together in one stunning card you too can create!

All Images (c) 2020 Stampin' Up! 

HOT TIP #1: Use a 1-1/2" x 6" piece of silver foil, so after you use the Curvy Die you are able to line up the silver foil on the edge of the Feels Like Frost DSP, and trim off the excess once you have adhered the foil to the DSP.

HOT TIP#2: Be sure to use a sticky lint tape roller brush to pick up all the little cut out dots on your workspace and die cut machine.


A close up to admire the beautiful bell die with the Metallic Mesh Ribbon Bow. That ribbon is so soft and supple. I folded the ribbon in half to thread through the top loop of the bell die. Tying it is a dream!

HOT TIP #3: After you die cut the bell, carefully flip it over keeping the holly leaves intact and scotch tape over the back of the bell to hold them in place.


Here's a peek of the inside of the card using a smaller bell die and a 1/2" strip of the Feels Like Frost DSP.  This is a great way to finish off a card with a little extra pizzazz!

Maybe this inspiration will be enough to encourage you to make you own Christmas cards this year! They are fun to do and gives you such a sense of accomplishment!

Have a lovely day!

#stampinwitheva #stampinupproducts  

Friday, November 6, 2020

Curvy Blue Jingle Bell Card

Here's the last card I am sharing with you this week featuring the new Curvy Christmas stamp set and Curvy Dies that are available for preorder.  I just LOVE how this Christmas card turned out! It was very easy to make. The addition of the Sounds of the Seasons Dies, Silver and Navy Foil, and Feels Like Frost 6x6 Designer Series Paper (DSP) Stack results in one stunning card you too can create!


HOT TIP #1: Use a 1-1/2" x 6" piece of silver foil, so after you use the Curvy Die you are able to line up the silver foil on the edge of the Feels Like Frost DSP, and trim off the excess once you have adhered the foil to the DSP.

HOT TIP#2: Be sure to use a sticky lint tape roller brush to pick up all the little cut out dots on your workspace and die cut machine.


A close up to admire the beautiful bell die with the Metallic Mesh Ribbon Bow. That ribbon is so soft and supple. I folded the ribbon in half to thread through the top loop of the bell die. Tying it is a dream!

HOT TIP #3: After you die cut the bell, carefully flip it over keeping the holly leaves intact and scotch tape over the back of the bell to hold them in place.



Here's a peek of the inside of the card using a smaller bell die and a 1/2" strip of the Feels Like Frost DSP.  This is a great way to finish off a card with a little extra pizzazz!


Here's the Products used in Today's Project - these are available to order at my online store by clicking any of the pictures below: 

Noble Peacock Foil Sheets
Noble Peacock Foil Sheets
[149495]
$10.00
Paper Snips
[103579]
$10.00

Need a card? Ask me and I can create one for you. 

Want the supplies to create your own, let me know and I can help you with that too!

Thank you for visiting today

As always, thank you for choosing me as your Stampin’ Up! Demonstrator!!



 

Tuesday, November 3, 2020

Going to Grandmas

Here's my first card to share with you using the Curvy Christmas Stamp Set and Curvy Dies. Some stamping, some die cutting, and some fussy cutting. I think it turned out pretty cute. Do you agree? Let me know your thoughts in a comment.


Here's a tip for you!  
  • Prepare your Whisper White layer 4" x 5-1/4" but don't glue it down to the Crushed Curry 5-1/2" x 8-1/2" card base, scored at 4-1/4".
  • Cut your two pieces of Designer Series Paper (DSP) 2" x 6" and set the curvy die on it one sheet at a time. After die cutting each sheet you now have some flexibility in matching the curves. Don't glue them down yet either. Save the extra parts for the inner card layer.
  • Then lay the curved stamps where you want them on the Whisper White and press Clear Block I down on the stamp.  The trees were stamped in Shaded Spruce. The stars were stamped in Crushed Curry. 
  • Once you are happy with your stamped images, now you may glue the DSP down to the Whisper White layer. With paper snips trim off any excess DSP. Now glue your card front to the card base.

The fun touches that were added are houses and people fussy cut from the Trimming the Town Designer Series Paper and raised with Dimensionals. 
  • Star embellishments added from All the Trimmings package.
  • Tag is 5/8" wide and cut to length using the Tailored Tag Punch. Insert just one end of the tag at a time into one "V" portion of the die, center it and punch, the result a perfect tag end.
These new products are available TODAY in my online store CLICK HERE

If you like today's post...

  • Sign up with your email for Blog Updates in the right column
  • Please comment, I love to connect with my readers!
  • Shop Online 24/7 & Earn Loyalty Points for FREE STAMPS    
Thank you for visiting today
As always, thank you for choosing me as your Stampin’ Up! Demonstrator!!



Monday, November 2, 2020

New Curvy Celebrations

Do you like Sneek Peeks? 
Here's an awesome set coming in the new Jan.-May 2021 Mini Catalog. 
But you can buy it early starting tomorrow!






This is a better close-up of the Designer Series Paper. It's so beautiful in person!
Shaded Spruce, Crumb Cake and Cherry Cobbler are so lovely together!



If you happen to be behind on making your Christmas Cards this year. The Quite Curvy Variety Bundle would help you create a bunch in no time at all.  The Dies go through your die cutting machine very smoothly.

This Collection has so many possibilities, you should consider adding it to YOUR Collection!

Thank you for visiting today

As always, thank you for choosing me as your Stampin’ Up! Demonstrator!!